Thermoplastic Airless Paint Spray Hose Manufacturers: HIC Universal
Thermoplastic Airless Paint Spray hose pipe manufactured in Polyester elastomer reinforced with single braid of high tensile steel wire having low permeation value of polyamide used as high pressure airless paint sprayer hose for transfer of aggressive fluids, solvents in paints and chemical industries for spraying industrial gases application supplied as per HIC’s standards produced by HIC Universal India exporters of paint spray hoses to Egypt, UK, Japan, Germany, USA, Italy, Taiwan, South Korea, Thailand, China, Australia, Nigeria, Kenya, South Africa, Morocco, UAE.
Airless Paint Spray Hose 1 Wire Braided 275/ 320 bar TECHNICAL SPECIFICATIONS: HIC
|ID = NB size range (mm)||Working Pressure (bar)||Rubber Tube (lining)||Cover & Finish||Reinforcement||Burst Pressure (bar) & Temperature|
6.3 x 11.7OD,
(1.6” Min. Bend radius)
8 x 15.6OD,
(2” Min. Bend radius)
Test Pressure 2 : 1
|Polyester Elastomer (PE-E) or / Nylon (PA) core polyamide||
Polyurethane(PUR), abrasion resistant Thermoplastic; Perforated
BLUE/ BLACK color
|1 braid of high tensile steel wire (conductive type)||1280(6.3mm ID)
- 40ºC to + 95ºC
4 : 1
* Roll Lengths manufactured are 100 meters Max (= 328 feet Approx.) of Braided hoses.
** Packaging in coils wrapped in HDPE or Jute cloth straight stuffed from factory into direct truck/ trailer.
*** End Fittings like Quick Release Hydraulic Couplings in CS or SS304 material and any other customized end connections duly fitted with hose pipe also supplied.